Make a lithophane or relief from a photo
A lithophane is a thin 3D print that reveals its image when held against the light: dark areas are thick, light areas thin. The converter turns your photo into such a height map – or into a relief where brightness becomes height.
How it works
- Drop a photo (PNG or JPG) into the window.
- Choose the “Height map → STL” mode, variant lithophane or relief.
- Set min. and max. thickness, resolution and, if needed, gamma and smoothing.
- Optionally add a frame and click “Export STL”.
Features
- Lithophane (dark = thick) and relief (dark = high or low)
- Resolution in mm per grid point, warning for very large models
- Gamma, smoothing and tone controls (brightness, contrast) for the photo
- Optional frame, closed printable volume
Tips
- Typical values: 0.8 mm min. thickness and 3 mm max. thickness.
- Print lithophanes upright with 100 % infill, using light (white) filament.
- High-contrast photos with clear faces or subjects work best.
FAQ
- What is the difference between lithophane and relief?
- A lithophane reveals the image in backlight (dark = thick). In a relief, brightness sets the height of the surface.
- How large will the file be?
- That depends on size and resolution. The triangle count is shown, and very large models trigger a warning.